LX H30-R2 Spa Heater 3 kW - 1,5 inch

LX 3kW heater for spas

The LX 3kW is a good heater suitable for almost all spas. LX heaters are widely used in spas manufactured in China. A spa heater heats the water in your spa. The water is pumped through the heater by a circulation pump. The LX 3kW is equipped with a flow protection device. With a standard 50mm connection, the spa heater is very easy to replace.

Capacity and consumption LX 3kW

The LX 3kW consumes 3.0 kW at full power against a maximum flow of 400 litres/min.

Use and installation LX 3kW

Installing the LX 3kW generally doesn't require any additional materials. Make sure the connections match and the heater's dimensions are roughly the same so you don't have to make any changes to the piping. If you have a different connection, use a connector. The LX 3kW measures 29 x 19.5 x 5 cm (L x H x W).

Every spa has the option to close the valves to stop water from flowing through the heater. A small amount of water may still escape when you remove the heater. Make sure the spa is turned off. You can now safely replace the heater. Always read the manual before replacing the heater.

Features LX 3kW

• CE and TUV certified
• Standard connection